Renewing an old Westinghouse console radio

-
I have had this Westinghouse console radio with chassis number 512  for a number of years and now that I have the extra time it seemed appropriate to fix it up. I don't know what model number it is but as is the case in many of these old radios and Westinghouse is no exception, the 512 chassis found it's way into a lot of radios, consoles and tabletops alike. If you happen know the model number please let me know. I do know that it was made in 1936.

Westinghouse console radio
I thought it needed total redoing but a couple of things concern me. In the photo you can see a view of a geometric-style design (upper part of the clock along the sides) which might be very hard to duplicate, so let's stay with a mild rejuvenation rather than wholesale stripping. 
This design would be very difficult to duplicate
It also looks like someone (not me) tried to spruce it up by applying a new coat of lacquer(?). Not unsightly but I can work around that. Some of that lacquer got onto the dial cover which is problematic.
Chassis #512
You can see tin or brass plates above two of the knobs. Did the other knobs have the same feature? I really don't think so though it looks a little off balance. The knobs appear to be original, great! When you buy these old radios there is typically a knob or two missing which is a pain because it is so difficult to find matching knobs.
Plates above first and third knobs
Dial cover is old and yellowed
The dial face is dark and yellowed with age. Can it be replaced? Apparently,yes. There is a company in the USA that sells after-market dial covers. Right now I am trying to see what I can do with Murphy's soap and toothpaste.

Radio chassis removed from the console
I spent part of the day re-gluing some veneer; always a necessary first step. Thankfully there was little to clamp and glue, not like my previous project. The frame is in great shape and the veneer has weathered time quite well. In the above photo the veneer on the left side lifted about 1/4 of an inch and that was the worst part. It is important to have a good assortment of spring and pressure clamps when you are restoring old furniture. Use yellow carpenter's glue rather than the white stuff, it holds better. Purists please note: I probably would have used hide glue if this was an authentic step-by-step restoration.

 Next is taking off the seemingly thousands of drops of white paint. Why don't folks cover their furniture when they paint rooms. A bit of a pain but very do-able though time consuming.

 I will report on my progress but in the meantime here is a Stromberg Carlson 662 that I recently finished.
Stromberg Carlson 662
Thanks for taking the time to read my blog and leave a comment if you wish.

Comments

Post a Comment

Popular posts from this blog

Seth Thomas Round Top Mantel Clock

-
Image
Seth Thomas Dome clock I wrote about this clock a few months back and at that time it was only running for a couple of days. I was pretty happy with my purchase since I had picked it up at a junk / antique store just about a 1/2 hours drive from here. It has, in fact been running wonderfully for several months now. It's a bit idiosyncratic in that despite being an 8-day clock it does not like being wound right down because the count wheel for the strike gets confused and strikes the hour on the half hour instead. Could be it needs some adjustment. Keeping it wound without it stopping has proven to work. It also ticks quite loudly but it is in our dining room and certainly not intrusive in that location. It has been oiled and seems to runs just fine. The walnut case is in excellent condition and a good rubbing with Murphy's Soap has virtually restored the cabinet. I make it a point not to redo the clock finish if it has minor nicks and scratches. I have an assortment of
Read more

Seth Thomas Gothic Beehive Mantle Clock

-
Image
Seth Thomas Beehive Mantle clock circa 1928 This is a Seth Thomas Gothic beehive mantle clock. The face has Henry Birks & Sons inscribed on it and obviously the company contracted the clock out to Seth Thomas at that time. The movement is an 89AL which was used in a variety of clock between 1922 and 1928 so I would put this clock at around the 1928 period. There is a little plaque inside the back access door giving the reseller location which in this case is Amherst, Nova Scotia. I has been running all day now and I am just waiting to see whether it gains or loses time. I will know in about 24 hours. The beat is good but the clock chimes the hours on the half hour which is obviously not supposed to happen. It means a minute hand pin adjustment once I know that the clock can run steadily. As is typical of these old clocks there was a lot of dirt and grime on the finish. Rather than take the dramatic step of refinishing the clock it is far easier to take a good cleaner, in my
Read more

Photography Rant – Is It A Rant Or Just Some Observations?

-
Image
Panasonic G6 with 45-175mm zoom On my last holiday trips outside this country I was surprised to see so many people using cell phones to take photos. Perhaps I shouldn’t be surprised, the world of technology is changing and changing very rapidly. I was also equally surprised to see so few people using cameras and most of what I saw were larger DSLRs (I am a mirrorless user myself). Some were even using their iPad which in and of itself is rather amusing to watch. Cell phones have virtually hosed the lower digital camera market and must be a blow to the bottom line of camera companies who saw much of their profit in these small entry level cameras go out the window in recent years. So, along comes the cell phone, the new Kodak Instamatic.  If you are into a phone contract as most people are you might as well take advantage of as many features of the phone as you can and that includes taking photos and immediately posting them for all the world to see. Cell phones have opera
Read more